Stainless steel vacuum cups | Insulated containers | Titanium cups | Plastic drinkware | General safety and hygiene

Standard revision notice

GB/T 29606-2026 Stainless Steel Vacuum Cups will apply from 1 February 2027, replacing GB/T 29606-2013. The new edition adds test items including combination lock, fingerprint lock, temperature display, communication, setting functions, flip lid, anti-splash performance and water output.

For products fitted with an electronic display, a combination or fingerprint lock, or a one-touch pop-up lid, reports issued under the 2013 edition do not cover these items and supplementary testing against the new edition is required.

CIRS Testing has completed the accreditation scope extension for the GB/T 29606-2026 test items and can issue formal reports bearing the CMA mark under the new edition. Early scheduling is recommended to avoid the peak in submissions before and after the implementation date. Thermal cookers, insulated buckets, titanium cups, plastic sports bottles, glass cups, ceramic cups and enamelled cups are also within our CMA / CNAS accredited scope.

1. Which products need testing

Product type

Impact of the revision

Smart / functional vacuum cups (with digital display, temperature measurement or locks)

The 2026 edition adds combination lock, fingerprint lock, display, communication, setting functions, flip lid, anti-splash performance and water output items; reports under the 2013 edition do not cover these items

Conventional stainless steel vacuum cups

New edition applies from 1 February 2027

Thermal cookers, titanium cups, plastic bottles and other drinkware

Governed by their own standards (GB/T 40355, QB/T 5612, QB/T 4049, etc.), which do not overlap with GB/T 29606

2. Test items for stainless steel vacuum cups (GB/T 29606-2026)

Recommended (voluntary) national standard; applies from 1 February 2027.

2.1 New and adjusted items

GB/T 29606-2026 — new and adjusted test items

Water output

Combination lock

Fingerprint lock

Display function

Communication function

Setting function

Flip lid

Anti-splash performance

Detachable parts

Volume deviation

Marking, labelling and instructions for use

3. Test items for other drinkware categories

Most manufacturers run drinkware products on shared production lines and with shared suppliers, so testing can be combined: one application covers several product types, liaison is simpler, and channel qualification audits are easier to handle in one go.

3.1 Stainless steel vacuum insulated containers — GB/T 40355-2021 (thermal cookers / insulated buckets / food jars)

GB/T 40355-2021 — test items

Thermal insulation performance

Heat resistance of rubber parts in hot water

Coating adhesion

Adhesion of printed text and patterns

Volume deviation

Sealing parts and odour in hot water

Handle and carrying-ring mounting strength

Lid (stopper) screw-thread strength

Impact resistance

Carrying strap and sling strength

Stability

Service performance

Leak-tightness

Appearance

Labelling and instructions for use

Marking

3.2 Titanium cups — QB/T 5612-2021

QB/T 5612-2021 — test items

Heat resistance of rubber parts in hot water

Stability

Adhesion of outer-surface coating

Service performance

Thermal insulation performance

Outer surface

Temperature

Capacity deviation

Leak-tightness

Handle, carrying-ring and sling strength

Lid (stopper) screw-thread strength

Impact resistance

Carrying strap strength

Adhesion of printed text and patterns

Appearance

Odour

3.3 Plastic drinkware — QB/T 4049-2021 (PC / Tritan / PP sports bottles and everyday cups)

QB/T 4049-2021 — test items

Heat resistance of sealing rubber parts

Heat resistance

Fit between lid and cup

Low-temperature resistance

Adhesion of surface printing

Sealing parts

Handle or carrying-strap (ring) strength

Capacity deviation

Odour

Leak-tightness

Impact resistance

Appearance

Marking

4. General safety and hygiene, accessory materials and microbiology (common to all drinkware)

Article / accessory

Test items

Metal cup body — GB 4806.9-2023

Sensory properties, food-simulant extraction, labelling and marking, overall migration, potassium permanganate consumption, migration of primary aromatic amines, N-nitrosamines and volatile substances; migration of lead, cadmium, chromium, nickel, copper, zinc, aluminium, manganese, antimony and tin; migration of arsenic, barium, cobalt, molybdenum and iron; bisphenol A (BPA); coliforms, Salmonella, Shigella and moulds; Staphylococcus aureus, β-haemolytic streptococci, and other items.

Rubber sealing rings — GB 4806.11-2023

Silicone sealing parts — GB 4806.16-2025

Glass containers — GB 4806.5-2016

Ceramic ware — GB 4806.4-2016

Enamelled ware — GB 4806.3-2016

Heavy metal migration (test method) — GB 31604.49-2023

PC material, specific requirements — SN/T 2379-2009

Microbiological requirements — GB 14934-2016

Disposable plastic tableware — GB/T 18006.1-2009

Why Choose CIRS Testing?

CIRS Testing, as an internationally recognized testing, inspection, and certification body, offers one-stop solutions for product compliance, including routine high-risk substance testing of food contact materials. If you need any assistance or have any questions, please get in touch with us via test@cirs-group.com.